結合Lift-Off及薄膜沈積技術製作固態電致色變影像顯示元件

dc.contributor國立臺灣師範大學機電工程學系zh_tw
dc.contributor.author程金保zh_tw
dc.contributor.author楊啟榮zh_tw
dc.contributor.author林雅慧zh_tw
dc.contributor.author李宗恆zh_tw
dc.contributor.author倪茂倫zh_tw
dc.date.accessioned2014-10-30T09:36:17Z
dc.date.available2014-10-30T09:36:17Z
dc.date.issued2009-09-01zh_TW
dc.description.abstract本專題主要重點在開發一雙面變色的電致色變系統,使元件中有兩層電致變色層,可透過反覆切換正負電壓,來顯示出這兩層薄膜中不同的圖案。元件之影像圖案係利用lift-off製程在ITO玻璃上來產生,並成長氧化鎢薄膜,以固態封裝方式製作一低耗能之電致色變影像顯示元件,極小的驅動電壓即可呈現影像。在薄膜沈積技術上,本專題使用濺鍍法與溶膠凝膠法分別沈積氧化鎢薄膜,並比較其特性與薄膜在著色態與去色態時之穿透率變化 (ΔT),選擇具有較佳視覺對比的薄膜沈積技術來製作本專題的影像顯示元件。製作完成之元件在驅動電壓±3V時之著色響應時間爲3.87秒、去色爲 2.86秒,同時並利用拉曼光譜分析來探討氧化鎢電致色變薄膜之變色機制。此外,本專題製作的影像顯示元件,其操作電壓範圍在-4V至+4V間,可透過調整驅動電壓大小來改變顏色的深淺,提高元件的視覺對比。再者,此元件亦可製作在PET軟性基板上,達到可撓式之功能。未來期望能透過曝光顯影製程道數的增加及電路的設計與控制來提高影像的複雜度與多樣性。zh_tw
dc.description.abstractThis work has been concentrated on the fabrication of solid-state electrochromic display devices with double-sided electrochromic layers. The different images in the double-sided electrochromic layer can be revealed by applying positive and negative potential alternately. The specific patterns of the display were made on ITO glass by the lift-off process. And the tungsten oxide electrochromic layers of the display were prepared by RF sputtering because it can provide better electrochromic properties than sol-gel process. A reversible color change between blue and colorless was observed when appropriate positive and negative voltage were applied alternately to the electrochromic display device. The tungsten oxide electrochromic film has short bleach-coloration transition time when applying appropriate voltage of-3V/+3V. Switch-ing the colour takes about 3.87 seconds while the associated memory time is several hours. Turning off the colour takes about 2.86 seconds. The color depth of electrochromic film can be controlled by adjusting the magnitude of driving voltage. Furthermore, monitoring the changes in Raman spectra of the electrochromic films with bleach-coloration states enables the discussion of the mechanism of colouration. Finally, the electrochromic layers can also be made on PET substrate to produce a flexible electrochromic display device. In the future, the multiplicity of images of the electrochromic display devices may be enhanced by improving lift-off process and designing circuit.en_US
dc.description.urihttp://140.118.16.82/school/file/journal/345.pdfzh_TW
dc.identifierntnulib_tp_E0403_01_021zh_TW
dc.identifier.issn1012-3407zh_TW
dc.identifier.urihttp://rportal.lib.ntnu.edu.tw/handle/20.500.12235/36964
dc.languagechizh_TW
dc.publisher國立臺灣科技大學技術及職業教育研究中心en_US
dc.relation技術學刊,24(3),175-182。zh_tw
dc.subject.other電致色變zh_tw
dc.subject.other氧化鎢薄膜zh_tw
dc.subject.other濺鍍zh_tw
dc.subject.other溶膠凝膠法zh_tw
dc.subject.otherlift-off製程zh_tw
dc.subject.otherelectrochromic display devicesen_US
dc.subject.othertungsten oxide thin filmen_US
dc.subject.othersputteringen_US
dc.subject.othersol-gel processen_US
dc.subject.otherlift-off processen_US
dc.title結合Lift-Off及薄膜沈積技術製作固態電致色變影像顯示元件zh_tw
dc.titleFabrication of Solid-State Electrochromic Display Devices by Combining Lift-Off and Thin Film Deposition Technologyen_US

Files

Collections