教師著作
Permanent URI for this collectionhttp://rportal.lib.ntnu.edu.tw/handle/20.500.12235/31266
Browse
254 results
Search Results
Item 語意網技術導論(碁峰, 2006-09-07) Grigoris Antonious; Frank van Harmelen; 屠名正Item 以田口法搭配有限元分析之撓性鉸鍊研究之(2008-06-28) 屠名正; 李長憲Item Opto-mechanical analysis for confocal laser scanning microscopes(The International Society for Optical Engineering (SPIE), 2005-08-02) Chang, Gao-Wei; Twu, Ming-Jenq; Lin, Yu-Hsuan; Liao, Chia-Cheng; Kuo, Hung-ZenThe confocal imaging has become one of the most widely applied microscopic techniques in various fields, such as biotechnology, automation engineering, optical engineering, solid-state physics, metallurgy, integrated circuit inspection, etc. Confocal laser scanning microscopy (CLSM) is primarily based on the use of apertures in the detection path to provide the acquired three-dimensional images with satisfactory contrast and resolution. The major objective of this paper is to analyze the imaging performance of the confocal microscopes with varying opto-mechanical conditions. In this paper, the working principles of the one- and two-dimensional scanning mechanisms in the microscopic systems are first reviewed and verified by opto-mechanical simulations. Then, for the imaging performance, the tolerance to the fabrication and assembly of the optical components in conventional confocal microscopes is also investigated by simulations. The simulation results indicate the importance of eliminating the effects of stray light in the microscopic systems.Item 心智 : 認知科學導論(五南, 2003-04-01) Paul Thagard; 屠名正Item Mathematica 程式設計入門(高立, 2003-03-20) 屠名正Item 不銹鋼薄板應用脈衝式雷射銲接之數值分析(高雄市 ： 中華民國銲接協會, 2008-09-01) 屠名正; 鄭慶民; 謝欣涵Item 超精密定位平台撓性結構之研究(2008-11-21) 屠名正; 范功達Item 單一壓電塊實現旋轉定位平台之研究(2009-11-20) 屠名正; 邱弘興; 蔡維倫; 范功達Item 應用有限元素法於7075鋁合金銲接殘留應力及角變形之數值模擬分析(高雄市 ： 中華民國銲接協會, 2007-09-01) 鄭慶民; 屠名正; 鄭欽源; 范功達Item 具有抗反射表面的太陽能電池及其製造方法(2008-01-01) 楊啟榮; 李幸憲; 黃茂榕