國立臺灣師範大學機電工程學系楊啟榮曾柏翔賴昶均羅嘉佑2014-10-302014-10-302007-11-23http://rportal.lib.ntnu.edu.tw/handle/20.500.12235/37013本研究提出一種新型微探針陣列製造技術，利用微機電製程特有之矽基體型微加工技術、KMPR厚膜光阻微影、精密電鑄製程，並結合PDMS聚合物材料之選用，於可撓曲基板上製造出三維微探針陣列。於實驗中，建立新型厚膜光阻KMPR 1050之相關製程參數，使得以一次旋轉塗佈的製程，便可得到厚度約130.mu.m之光阻膜。配合KOH蝕刻、精密電鑄製程與本實驗所提出之二階段式光阻去除步驟，可於撓曲基材上製作出高度約170.mu.m、寬為50.mu.m，深寬比達3.4，且具出平面特性之微探針陣列。The research has developed a novel method of microneedle array through the combination of integrating silicon bulk micromachining, thick photoresist KMPR1050, electroforming and polymer material PDMS.The microneedle array was successful fabricated on a flexible PDMS substrate. This study complete establish experimental parameters of KMPR, and can produce thickness of 130.mu.m KMPR by single spin. Combination of 130.mu.m KMPR, KOH etching, electroforming, two-step removing KMPR, the length of the microneedle array is 170.mu.m and width is 50.mu.m (aspect ratio, 3.5) which is out of plane was successful fabricated on a flexible PDMS substrate.三維微探針陣列KMPR厚膜光阻精密電鑄3D microneedle arrayKMPR 1050Electroforming