Please use this identifier to cite or link to this item:
Title: 高深寬比光輔助電化學蝕刻技術應用於微光開關之研製
Development of Micro-Optical Switch by High-Aspect-Ratio Photo-Assisted Electrochemical Etching Technology
Authors: 國立臺灣師範大學機電工程學系
Issue Date: 1-Jul-2004
Abstract: 本研究計畫將發展低成本之光輔助電化學蝕刻(ECE)技術,應用於具高深寬比矽微結構之製作,並利用改變光照強度與電流密度等實驗條件,達到微光機電結構之製作,以取代高成本的感應耦合電漿離子蝕刻(ICP-RIE)製程技術。由實驗的結果顯示,本研究已順利自行開發電化學蝕刻高深寬比孔洞所需之設備,並利用此設備得到最佳之製程參數,蝕刻所得結構之深寬比超過70以上,除此之外,並在蝕刻液中添加自行開發之添加劑,使孔洞側壁結構具更佳之粗糙度,其有非常顯著的效果。最後透過蝕刻時間的增加,使孔洞深度加深,使其能夠達到貫穿晶片及符合晶圓級封裝之需求。
The project will develop the technology of low-cost photo-assisted electrochemical etching (ECE) for the fabrication of silicon micro- structure with high aspect ratio. The technique will take the place of inductively coupled plasma reactive ion etching (ICP-RIE) process. For the application of micro- opto-electro-mechanical system (MOEMS). The results show we olready set up photo-assisted electro-chemical etching apparatus in this study. we also find optimal process condition with the apparatus and get over 50 aspect micro-structure. Moreover, To use an additive improve the structure roughness. After through-holes etching obtained, a wafer with conductive inter-connection will be bonded with the device wafer finally.
Other Identifiers: ntnulib_tp_E0403_04_010
Appears in Collections:教師著作

Files in This Item:
There are no files associated with this item.

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.