Please use this identifier to cite or link to this item:
Title: Investigation of Annealing-treatment on the Optical and Electrical Properties of Sol-Gel-Derived Zinc Oxide Thin Films
Authors: 國立臺灣師範大學機電工程學系
Chen, Wei-Chun
Cheng, Chin-Pao
Kuo, Shou-Yi
Issue Date: 31-May-2005
Abstract: Highly preferential c-axis orientation ZnO thin films on Si(100) and quartz substrates have been achieved by sol-gel method. Structural investigation including surface morphology and microstructure was carried out by XRD, SEM and AFM measurements. Also, optical properties were determined by photoluminescence, ellipsometry and UV-VIS spectrum analyses. XRD results indicated that an extremely sharp (002) peak will dominate under optimum annealing-treatment condition. Moreover, thin film quality and the morphology were improved by annealing treatment. The SEM images show that the grains sizes increased with increasing annealing temperature up to 750 oC, where the particle size was about 50 nm. Photoluminescence spectra revealed two main peaks centered at about 380 nm and 520 nm, corresponding to the band-edge and defect-related emission. The variation in UV emission intensity was attributed to the competition between the excitonic and nonradiative recombination. It was proposed that annealing temperature plays a key role in the formation of defects, which is strongly related to the nonradiative recombination centers. In addition, optical transmittance spectra demonstrated that these films are very transparent (~90%) in the range of 380-800 nm wavelength, and optical band-gap was determined accordingly. The impact of the thermal treatment on the structural and optical properties was discussed in detail.
Other Identifiers: ntnulib_tp_E0401_02_011
Appears in Collections:教師著作

Files in This Item:
There are no files associated with this item.

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.