Please use this identifier to cite or link to this item:
Title: Design of 1.2 V broadband, high data-rate CMOS MMW I/Q modulator and demodulator using modified Gilbert-cell mixer
Authors: 國立臺灣師範大學應用電子科技學系
Jeng-Han Tsai
Issue Date: 1-May-2011
Publisher: IEEE Microwave Theory and Techniques Society
Abstract: In this paper, low-voltage evolution and high-speed operation mixer design are presented for millimeter-wave (MMW) CMOS in-phase/quadrature (I/Q) modulator and demodulator. The modified Gilbert-cell mixer architecture, which eliminates the three-level transistors stacking in the conventional Gilbert-cell mixer, can operate at a reduced supply voltage while maintaining reasonable performance. In addition, IF transimpedance amplifier buffer and wideband RF design are introduced to increase the operation speed of the mixer for MMW gigabit wireless transmission link applications. Using a 0.13-μm CMOS process, the I/Q modulator and demodulator formed with the modified Gilbert-cell mixers are demonstrated at the MMW. Under 1.2-V standard supply voltage, the modulator and demodulator exhibit excellent conversion gain (CG) flatness of -3.5 ±1.5 dB and -3 ±1.5 dB from 41 to 69.5 GHz and 31 to 69 GHz, respectively. For 60-GHz wireless personal area network applications, π/4 differential quadrature phase-shift keying, 16 quadrature amplitude modulation, and binary phase-shift keying modulation signal tests are successfully performed through the direct-conversion system. The results show that the presented monolithic microwave integrated circuits can operate at low-voltage and low-power while providing good CG and high data rate, even up to multigigabit.
ISSN: 0018-9480
Other Identifiers: ntnulib_tp_E0611_01_006
Appears in Collections:教師著作

Files in This Item:
There are no files associated with this item.

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.