Please use this identifier to cite or link to this item: http://rportal.lib.ntnu.edu.tw:80/handle/20.500.12235/100014
Full metadata record
DC FieldValueLanguage
dc.contributor陳家俊zh_TW
dc.contributorChen, Chia-Chunen_US
dc.contributor.author黃韋程zh_TW
dc.contributor.authorHuang, wei-chengen_US
dc.date.accessioned2019-09-04T09:06:23Z-
dc.date.available不公開
dc.date.available2019-09-04T09:06:23Z-
dc.date.issued2015
dc.identifierG060242093S
dc.identifier.urihttp://etds.lib.ntnu.edu.tw/cgi-bin/gs32/gsweb.cgi?o=dstdcdr&s=%22http://etds.lib.ntnu.edu.tw/cgi-bin/gs32/gsweb.cgi?o=dstdcdr&s=id=%22G060242093S%22.&%22.id.&
dc.identifier.urihttp://rportal.lib.ntnu.edu.tw:80/handle/20.500.12235/100014-
dc.description.abstract二氧化錫是近年來鋰離子電池中備受矚目的陽極材料,因為二氧化錫具有很高的比電容量(782mAhg-1)等優點,但其最大的缺點是在鋰離子嵌入材料後,體積會膨脹造成電容量快速地衰減。本研究利用商用碳酸鈣奈米粒子為模板,蔗糖為碳源合成三維多孔碳奈米材料,經由水熱法製備二氧化錫/三維多孔碳複合材料。 多孔碳結構具有高表面積、高孔隙體積、高導電度等優點,可以解決二氧化錫本身導電度不足的缺點,此外,本研究使用海藻酸黏著劑並於電解液中添加FEC改善充放電過程中SEI不穩定等問題,使二氧化錫/三維多孔碳複合材料在電流密度1000 mAg-1下充放電一百次,其電容量仍保有462 mAhg-1以及98%以上的庫倫效率。zh_TW
dc.description.abstractTin dioxide as a promising anode material in Lithium ion batteries, offer a high theoretical gravimetric Li-storage capacity of 782 mAhg-1,which is more than twice that currently commercialized graphite (372 mAhg-1). However, like many other alloying anode materials, a large volume change during electrochemically alloy formation can lead to rapid deterioration of the electrode, thus greatly limiting the practical use of the SnO2 anode materials. In this study, we prepare a porous carbon by using commercial CaCO3 nanoparticle as template and sucrose as carbon source follow by 900℃high-temperature calcination. SnO2/porous carbon composites are synthesized by hydrothermal method, and served as anode of rechargeable Lithium ion batteries. The porous carbon structure with a high specific surface area, high pore volume and high electronic conductivity that can provide stable electronic transfer channel for SnO2/porous carbon composites. At 1.27C rate, the SnO2/porous carbon composites electrode prepared by using alginate as a binder and fluoroethylene carbonate(FEC) added to the electrolyte exhibited discharge capacity of 462mAhg-1 after 100 cycle.en_US
dc.description.sponsorship化學系zh_TW
dc.language中文
dc.subject鋰離子電池zh_TW
dc.subject三維多孔碳zh_TW
dc.subject二氧化錫zh_TW
dc.subject海藻酸zh_TW
dc.subjectlithium ion batteryen_US
dc.subjectporous carbonen_US
dc.subjecttin dioxideen_US
dc.subjectalginateen_US
dc.title利用三維多孔碳奈米結構提升二氧化錫陽極材料於鋰離子電池循環穩定性之研究zh_TW
dc.titleThe Cycling Performance Study of Tin Dioxide Loading in Three Dimensional Porous Carbon as Anode Electrode for Lithium Ion Batteriesen_US
Appears in Collections:學位論文

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.